DAIHAN-Sci.com or ALL
for
LAB.com Shopping Mall
DAIHAN Scientific, MS-MP4/8 Multipoint Magnetic Stirrer 12 / 15
3. Product Usage
3.3 Usage Instructions
-
Please proceed as described in this manual when operating this product.
1. Power-On: Turn on the power switch, then the MS-MP4/8 get into RPM mode.
Mode Selection: MS-MP4/8 series have 3 different Modes including default Mode. You can
change the mode by push MODE switch
⑦
. 3 Modes are; (1) Set Stirring Mode, (2) Set
Timer Mode and (3) Locking Mode. Default mode is the (1) Set Stirring Mode.
In <fig. 2>,
②
Set Value and
③
Measured Value have different meaning for each operation
mode. It is shown in the following <Table 1>.
<Table 1> the meaning of digit by mode
Setting Mode
Set Value
Measured Value
Control target
Set Stirring Mode
Set(Saved) Speed
(RPM)
Current Speed
(RPM)
Stirring Speed
(RPM)
Set Timer Mode
Set(Saved) Time
Time remained
Operation time
Locking Mode
Current Speed
Time remained
Display only
2. Set Stirring (RPM) Mode
A. After you turn on the power and select the RPM mode, you can see the Set Value is
zero or non-zero on LCD panel.
i.
If the Set Value is non-zero, it means someone has saved a set-value previously.
You can use the saved value or you can modify the value by turning the jog-
shuttle. Simply by clicking jog-shuttle, the unit begins to operate with the set RPM.
Power On
MODE
button
MODE
button
MODE
button
Stirring Mode
Timer Mode
Locking Mode
