DAIHAN-Sci.com or
ALL
for
LAB.com
Shopping Mall
DAIHAN Scientific, Digital Hotplates & Stirrers
16/44
3. Product Usage
3.3 Usage Instructions
①
MODE - Set Stirring Mode (MSH / MS Model)
-
When the power is turned ON, the initial screen is the setting mode of the stirring speed.
-
If the power is turned on, LED of STIRRING is flashed, and the screen of LCD Display indicates
the stirring speed to “0 RPM”, and the screen which can set up the speed is appeared.
-
The range of the stirring speed is 80 ~ 1,500 RPM.
-
If turning Jog-Dial Knob to clockwise, the setting value of LCD Display becomes larger
according to the control of the Knob by starting at minimum 80 RPM, and at the same time, the
stirring operation is started.
-
If the set stirring speed is 0 RPM, Start operation is applied through the Turning of the Jog-Dial
Knob, and if the setting value of the stirring speed is above 80 RPM, the value is changed by
Turning of the Jog-Dial Knob and the START operation is performed by the Push button.
-
If turning the Jog-Dial Knob to counter-clockwise during the stirring operation, the operation
can be stopped by reducing the speed value or by setting it to 0 RPM, or the Stop operation can
be carried out by the Push button of the Jog Dial Knob.
-
If the PUSH button of the Jog Dial Knob is pressed and held for 2-3 seconds, the setting value
is saved and this saved value is maintained even when the power is turned on again.
-
The STIRRING LED is flashed when entering into the Main mode, and the LED is always lit
when entering into other mode during the stirring operation.
-
The STIRRING indication of LCD Display is always displayed during the stirring operation, and if
< Fig 3.3.1> Set Stirring Mode
STIRRING LED (Green)
HEATING STIRRING TIMER
STIRRING
80 RPM
80 RPM
POWER
Set RPM
Present RPM
Indicate operation
Indicate Power
