Configuration
15
Table 5-1 SIP server parameter description
Parameter
Description
IP Address
IP address of SIP server.
Port
It is 5060 by default when another VTO works as
SIP server.
It is 5080 by default when the platform works as
SIP server.
Username/Password Use default value.
SIP Domain
It shall be VDP when another VTO works as SIP
server.
It can be null or keep default value when the
platform works as SIP server.
Login
Username/
Password
Username and password to login SIP server.
Alternate IP Addr.
IP address of the alternate server.
If alternate server is enabled and Express or DSS
works as SIP server, when Express or DSS cannot
work normally, the VTO will be used as SIP server.
Alternate Username
Username and password for logging in the alternate
server.
Alternate Password
Alternate VTS IP
Addr.
IP address of the alternate VTS.
Alternate Server
After entering alternate IP address, username,
password, and VTS IP address, you need to select the
Enable
checkbox to enable the alternate server.
Click
OK
to save the configuration.
Step 4
The VTO will restart automatically.
When the platform works as SIP server, if it is necessary to set Building No. and
Building Unit No., enable
Support Building
and
Support Unit
first.
5.3.5 Adding VTO Devices
You need to add VTO to the SIP server, and all intercoms connected to the same SIP server
can make video calls among each other. This section applies to the condition in which a VTO
works as SIP server, and if you are using other servers as SIP server, see the corresponding
manual for the detailed configuration.
Log in the web interface of the SIP server, and then select
Household Setting > VTO
Step 1
No. Management
.
The
VTO No. Management
interface is displayed. See Figure 5-9.
