Dahua VTO1220A, Руководство пользователя

Страница: 31 / 36

26

Fence station
VTO Middle Number
IP Address Set IP address of the VTO.
Step 4. Check Enable.
Step 5. Click OK.
6.2.9 IP Auto Allocation
You can go to User Manager>IP Allocate Auto interface, set VTH IP address, subnet mask,
default gateway and etc.
Step 1. Open User Manager>IP Allocate Auto interface.
Step 2. Input VTH IP range, subnet mask and default gateway.
Step 3. Click Enable. See Figure 6- 22.
Figure 6- 22
Step 4. Click OK.
Step 5. In VTH device, enter System Config>Project Setup interface.
Step 6. Input verification code, default is 888888.
Step 7. Enter local config interface, input room no. to auto allocate VTH IP.
6.2.10 Publish Information
In Publish Information page, you can send publish information and view historical
information.
6.2.10.1 Send Info
Step 1. Select System Config>Publish Information>Send Info.
Step 2. Select sending device and edit content to send.