Device Operation 7
3
Device Operation
3.1
Device Installation
This chapter explains device installation by taking NAVIGATOR X820 for example. Please refer
to actual product.
Insert data cable interface at the bottom of aircraft into the interface at the top of shock
absorber board, as shown in Figure 3-1.
Figure 3-1
Align 4 installation screws with bottom holes of the aircraft, and tighten them.
Fix PTZ camera onto the aircraft, as shown in Figure 3-2.
Figure 3-2
Turn on power supply of the aircraft, and wait for IMU (Inertial Measurement Unit)
calibration. After completing IMU calibration, the motor starts working while PTZ returns
to the center automatically.
Thus, PTZ camera has been installed completely.
Содержание UAV-GA-V-2030U
Страница 1: ...2MP 30x PTZ Camera User s Manual V1 0 0 ...
Страница 11: ...Device Structure 3 2 Device Structure 2 1 Product Dimensions Figure 2 1 UAV GA V 2030U Front View unit mm ...
Страница 12: ...Device Structure 4 Figure 2 2 UAV GA V 2030U Side View unit mm Figure 2 3 UAV GA V 2045U Front View unit mm ...