Installation 10
4.2.3 Installing Waterproof Connector
Installing waterproof connector for network port
Figure 4-4
4.2.4 Connecting Cable Ports
Refer to
“2.2 Cable” and connect each cable port to corresponding cables. Then use the
insulting tape to seal each port to prevent water leakage.
4.2.5 Adjusting Camera
Please make sure the adjusting screw is loosened when adjusting device direction and
monitoring angle. Tighten the adjusting screw firmly after adjustment is completed.
Please do not rotate the device body over 360
°
when the device body and mounting
pedestal form an angle of 90
°
and the adjusting screw is firmly tightened.
