119
Snapshot
Select the
Snapshot
check box to take a snapshot when there is an alarm.
To view and set storage path of snapshots, see "4.1.2.5 Configuring Storage
Path".
To make the snapshot function take effect, you need to firstly enable
motion-detection snapshots. See "4.7.1.2 Configuring Snapshot" for detailed
operations.
Click
Save
.
Step 4
4.5.4
Configuring Alarm
When there is an alarm from external Cameras, an alarm will be released and linked activities will be
executed.
Select
Setting > Event > Alarm
.
Step 1
The
Alarm
interface is displayed. See Figure 4-63.
Alarm settings
Figure 4-63
Select the
Enable
check box.
Step 2
Configure Relay activation parameters. See Table 4-35.
Step 3
Table 4-35
Alarm parameters
Parameters
Description
Relay-in
Select an external alarm Camera.
Period
Define a period during which the alarm settings are active.
1.
Click
Setting
, and the period setting interface is displayed.
2.
Configure period.
Method 1: Hold down and drag the left mouse button to select
working period you need.
Method 2: Select
Setting > Event > Video Detection
and click
Setting
on the right side of
Period
.
An interface
is displayed. In this interface,
there are seven
Setting
s altogether each of which corresponds to a
day in a week. Select a
Setting
you want and there are six periods
(period1-period6) below for you to pick up.
3.
Click
Save
of working period.
Anti-dither
Only one temperature alarm event is recorded within the time you have set.
Sensor type
You can select from normally open (NO) and normally closed (NC).
