16
4.2.2 Installation Steps
Step 1
As it is shown in Figure 4-3, first it needs to loosen the M4 screw on the lateral of the connection
chassis to separate the connection chassis from the connection pole, and then pull the
integration cable through the airproof slot at the bottom of connection chassis and make it pass
through the center hole which connects to the flange and fix the connection chassis on the ceiling.
Figure 4-3
Note
It needs to paste the silica gel on the surface between the connection chassis and ceiling, and
the location around cable exit to make it waterproof if the speed dome is applied in the outdoor
environment.
Step 2
As it is shown in Figure 4-4, pull the cable through the connection pole, and then rotate the
connection pole into the connection chassis and tighten the M4 screw firmly. Open the cable exit
hole on the decoration cover and push it all the way to the bottom.
Figure 4-4
