Step 5
Select the mode of setting IP address according to the actual situation.
DHCP: Set mode as
DHCP
when there is DHCP server in the network, then the device will
automatically acquire IP address from DHCP server.
Manual mode: Set mode as
Static
and fill in the Target IP, Subnet Mask and Gateway, and then
the device IP address is modified into the IP address which has been set.
Step 6
Click
OK
to complete modification.
2.1.2
Modify in Batches
Step 1
Click
and the system displays the interface of
Modify IP
.
Step 2
Click
Search Setting
and the system displays the dialog box of
Setting
, which is shown in Figure 2-3.
Figure 2-3
Step 3
Set the device network segment, login user name and password, and then click
OK
. The system will
display the searched devices after searching completes.
Note
The default username and password is
admin
and
admin
respectively.
Step 4
Select the devices whose IP addresses need to be modified, and then click
.
