Dahua PFS4218-16GT-190 страница 35 Скачать руководство пользователя

Страница: 35 / 86

Advanced Settings 28

Add a new statistics group

Figure 4-37

Set the parameters. See Table 4-10.

Step 3

Table 4-10 Statistics group parameter

Parameter

Description

ID number is user-defined.

Date Source

It is the mapping reference number of switch port in SNMP client.

Click

Save

Step 4

History

The history group regulates that the system periodically records the different types of flow

information from the port and stores the statistics result in the history table (etherHistoryTable),

and the management can check the result conveniently. The data contains bandwidth utilization,

error package quantity, and total package quantity.

The history group records the packets that the port receives in every period, and the period

length is user-defined.

Select

Advanced > Configuration > Security > RMON > History

Step 1

The History interface is displayed. See Figure 4-38.

History

Figure 4-38

Click

Add New Entry

, and set the ID and the data source.

Step 2

Click

Save

Step 3

Alarm

RMON alarm management can monitor the specific alarm variable (for example, the packet

quantity etherStatsPkts that the port receives). After creating the alarm table, the system can

periodically acquire the value of the monitored alarm variable according to the defined time.

When the value of the alarm variable reaches the upper threshold, one upper threshold alarm

event is triggered. And when the value of the alarm variable reaches the lower threshold, one

lower threshold alarm event is triggered. The alarm management can process the alarm events

according to the event definition.

When the sampling value of alarm variable continuously exceeds the threshold in the same

direction, only the first will trigger alarm. The upper threshold alarm event and the lower

threshold alarm event are alternate. When one upper threshold alarm event triggers, the next

must be the lower threshold alarm event. As the following figure, the value of alarm variable

Содержание PFS4218-16GT-190























































































Результаты поиска

Содержание PFS4218-16GT-190

Отзывы:

Похожие инструкции для PFS4218-16GT-190

Бренды по названию

Популярные бренды

Dahua PFS4218-16GT-190, Руководство по настройке веб

Результаты поиска

Содержание PFS4218-16GT-190

Отзывы:

Похожие инструкции для PFS4218-16GT-190

Бренды по названию

Популярные бренды