Dahua NVR21-8P-S2 SERIES, Руководство пользователя

Страница: 183 / 421

Step2
Step 3
want to call.
Click
■
to call the tour.
Click
■
again to stop calling the tour.
4.4.4.3 Calling Patterns
Procedure
User's Manual
Step 1 On the expanded PTZ control panel, in the No. box, enter the value of the pattern that you
want to call.
Step 2 Call
■
to call the pattern.
Step 3 The PTZ camera moves according to the configured pattern repeatedly.
Step 4 Click
■
again to stop calling the pattern.
4.4.4.4 Calling AutoScan
Procedure
Step 1 On the expanded PTZ control panel, in the No. box, enter the value of the border that you
want to call.
Step2 Click
■.
Step 3 The PTZ camera performs scanning according to the configured borders.
Step 4 Click
■
again to stop auto scanning.
4.4.4.S Calling AutoPan
Procedure
Step 1 On the expanded PTZ control panel, click
■
to start moving in horizontal direction.
Step 2 Click
■
again to stop moving.
4.4.4.6 Using Auxiliary Button
On the expanded PTZ control panel, click I
I
the AUX setting interface is displayed. See Figure 4-72.
In the Shortcut Aux list, select the option that corresponds to the applied protocol.
In the Aux No. box, enter the number that corresponds to the AUX switch on the decoder.
167