Dahua N53AJ52, Быстрое руководство по установке

Страница: 20 / 28

9
Using the Waterproof Ethernet Connector
Attach the waterproof network connector if the camera is used outdoors.
Place the wide side of the rubber ring onto the end of the network cable extending out from
the camera.
Pull the waterproof cable end without the Ethernet connector through the body of the
Waterproof Connector. Thread the cable through the Fixing Rubber Ring and the
Waterproof Locking Cover.
Attach the male Ethernet connector to the network cable coming from the camera. Ensure
the Waterproof Connector shroud covers the Ethernet connection.
Connect the other end of the waterproof connector to the network port and rotate it
clockwise to lock the network port and waterproof connector firmly.
Slide the Waterproof Locking Cover over the main body of waterproof connector and rotate
it clockwise to seal the connection.