Quick Start Guide
1
1 Introduction
1.1 Cable
Waterproof all the cable joints with insulating tape and waterproof tape to avoid short circuit and
water damage. For the detailed operation, see the
FAQ Manual
.
Figure 1-1 Cables
For more information about cable ports, see Table 1-1.
Table 1-1 Cable information
No.
Port name
Description
1
Power input
Inputs 12V DC power. Be sure to supply power as instructed in
the manual.
Device abnormity or damage might occur if power is not
supplied correctly.
2
Ethernet port
●
Connects to network with network cable.
●
Provides power to the device with PoE.
PoE is available on select models.
3
Audio input
BNC port. Connects to sound pickups to receive audio signal.
4
Audio output
BNC port. Connects to speaker to output audio signal.
5
Alarm I/O
Includes alarm signal input and output ports, and the number
of I/O ports might vary on different devices. For detailed
information, see Table 1-2.
6
RS-485
Controls external devices, such as PTZ.
For more information about I/O port, see Table 1-2.
Table 1-2 Alarm information
Port
Port Name
Description
Alarm I/O
ALARM_OUT
Outputs alarm signal to alarm device.
When connecting to alarm device, only the
ALARM_OUT port and ALARM_OUT_GND port with
the same number can be used together.
ALARM_OUT_GND