Local Configurations
26
General system settings
Figure 4-8
Configure the general setting parameters. For details, see Table 4-2.
Step 2
Table 4-2 General settings description
Parameter
Description
System
Time
Configure the current system time.
Date Format Select a date format for the system.
Date
Separator
Select a separator for the data format.
Time Format In the
Time Format
list, select
12-HOUR
or
24-HOUR
.
DST
The DST is applied in some countries or regions. Select the
DST
check box if
it is applied where the Device is located.
1. Select the
DST
check box.
2. Click
Setup
.
The
DST
interface is displayed.
3. According to the local regulations, configure the type, begin time and end
time for the DST.
4. Click
Save
.
Timing
Mode
You can configure how to calibrate the system time.
1. Click
Timing Mode
.
The
Timing Mode
interface is displayed.
2. Select a timing mode.
DSS: The system time syncs with DSS platform.
GPS: Configure the time zone. The system time syncs with satellite.
NTP: Click
NTP
, the
NTP
interface is displayed. Configure the
server IP, port, time zone, and interval, and then click OK. The
system time syncs with NTP server. Click
Manual Update
, the
Device starts syncing time with the NTP server immediately.
3. Click
Save
.