Dahua MCVR6204 Скачать руководство пользователя страница 166

Страница: 166 / 239

Web Operations

155

No.

Function

Description

File list

You can download recorded video by file type or time, and verify

the completeness.

Video clip

Clip a section of recorded video and save it. For details, see

"5.2.2.3 Clipping."

5.2.2.1 Playback controls bar

Playback control buttons. For details, see Table 5-15.

Table 5-15 Playback controls bar introduction

Icons

Function Description

Play

Represents Pause or the playback is not started. Click

this icon to start playing back.

Stop

During playing back, click this icon to stop playback.

frame

Click this icon to jump to the previous frame.

To use this function, the playback should be paused.

frame

Click this icon to jump to the next frame.

To use this function, the playback should be paused.

Fast

playback

and slow

playback

Move the slider to adjust the playback speed.

5.2.2.2 Playing Back Recorded Video Files

You can play back recorded video by time or file type. During playback, the following operations

are supported.



On the channel window, click

then hold down the left mouse button to select the area

you want to enlarge. The area is enlarged after the left mouse button is released. Click this

icon again or right-click on the window to exit.



Click

to take a snapshot.



Click

to close playback.

5.2.2.2.1 Playing Back Recorded Video by Time

Select the month and year that you want to search, and then select the screen split

Step 1

layout and enter the corresponding channel number.

Select a date with recorded video files, click on the window channel to select a

Step 2

playback channel, and then select the record type.

Record type

Figure 5-36

Содержание MCVR6204
















































































































































































































































Результаты поиска

Содержание MCVR6204

Отзывы:

Dahua MCVR6204, Руководство пользователя, Страница: 166 / 239

Результаты поиска

Содержание MCVR6204

Отзывы: