36
5.4.3.3 Auto Register
Through the auto registration function, when the Camera is connected with external network, its
current location will be sent to the server so that the Camera can be accessed through the server.
Step 1
Select
Setting
>
Network
>
Auto Register
>
Auto Register
.
Step 2
Select
On
to enable the function.
Figure 5-31 Auto register
Step 3
Configure parameters.
Table 5-19 Auto register parameter description
Parameter
Description
Address
The IP address of the server on which the device register.
Port
The port of the server for auto registration.
Sub-Device ID
The device ID distributed by the server for auto registration. Make sure
that the ID is unique during auto registration.
5.4.3.4 Platform
5.4.3.4.1 ONVIF
You can enable the Open Network Video Interface Forum (ONVIF) function to make network video
products of different manufacturers interworking.
ONVIF login authentication is enabled by default.
Step 1
Select
Setting
>
Network
>
Platform
>
ONVIF
.
Step 2
Select
Turn on
.
Figure 5-32 ONVIF
Step 3
Click
Confirm
.
5.4.3.4.2 Info Push Platform
You can configure this parameter to push the captured vehicle violations information to the server.
Step 1
Select
Setting
>
Network
>
Platform
>
Info Push Platform
.