20
Step 2
Cover the infrared sensors with tapes, and then adjust the safety level and sensitivity until
there is no false alarm caused by ambient environment.
Step 3
Test the detection ability of each zone with a metal object. If the alarm is not triggered,
adjust the frequency, and then do Step2 and Step3. Repeat the operations until the
detection ability meets your demand.
Step 4
Remove the tapes on the infrared sensors.
4.2 ISC-D218
4.2.1 Configuration Panel
Figure 4-14 Panel (LED screen) (ISC-D218)
Figure 4-15 Panel description (ISC-D218)
No.
Name
1
Displays number of passes.
2
Displays alarm times
3
●
Displays the entered value.
●
Displays error code.
4
+
