12
3
Device Installation
3.1
Device Installation
Please follow the steps listed below to install the device. Please refer to Figure 3-1 for reference.
Dig three holes in the wall or the surface, and then input the three expansion bolts to
the holes and secure.
Put the three fixed holes of the bottom of the bracket to the three holes you just dug in
the wall or surface. Put the three fixed screws to the three holes of the bracket and
then secure firmly. Finally you can fix the bracket in the wall or surface.
Figure 3-1 Device installation illustration
3.2
Install Micro SD Card
Step 1.
Rotate front cover counterclockwise and take it down, and you can see SD card clot.
Step 2.
Insert Micro-SD card into SD card slot according to Figure 2-2.
Step 3.
Put back front cover by clockwise rotating.
Note:
Please properly install Micro SD card, otherwise, may cause SD card error.
Please properly put back the front cover for waterproof purpose.