8
2 Device Installation
Note
The follow installation figures are for reference only, please refer to the actual product for
more details.
Lens assembly mode may be different according to different devices, please refer to the
actual lens for more details.
The bracket mounting wall needs to sustain at least 3X weight of camera and bracket.
Figure 2-1
Step 1
Fix the mounting bracket on the installation surface.
1. Mark bracket mounting hole sites on the installation surface, and dig four expansion bolt
bottom holes on the hole sites marked on the installation surface, then put four expansion
into the mounting holes and lock them firmly.
2. Align the four screw holes of mounting bracket bottom with four mounting hole sites on the
installation surface, then put four fixing screws into four screw holes of mounting bracket
bottom respectively and lock them firmly.
Step 2
Fix the device on the mounting bracket. Align the mounting hole sites of device enclosure bottom
with the mounting hole sites on the front of mounting bracket, then put the installation screws into
the screw holes and lock them firmly.
Step 3
Install lens.
When the device lens mount is bayonet, it supports installing the lens which conforms to
bayonet.
Dismantle the protection cover on the device, align the red spot on the lens with the red spot
of the lens mount, and rotate the lens clockwise till it is secured and installed properly.
