Network Configuration 2
2
Network Configuration
Device initialization and IP setting can be finished with the "ConfigTool" or in web interface. For
more information, see the
WEB Operation Manual
.
Device initialization is available on select models, and it is required at first use and after
device is being reset.
Device initialization is available only when the IP addresses of the device (192.168.1.108
by default) and the PC stays in the same network segment.
Planning useable network segment properly to connect the device to the network.
The following figures and interfaces are for reference only, and the actual product shall
prevail.
Initializing Device
2.1
Double-click "ConfigTool.exe" to open the tool.
Step 1
Click
.
Step 2
The
Modify IP
interface is displayed. See Figure 2-1.
Modify IP interface
Figure 2-1
Click
Search setting
.
Step 1
The
Setting
interface is displayed.
Enter the start IP and end IP of the network segment in which you want to search
Step 2
devices, and then click
OK
.
All the devices found in the network segment are listed.
Select one or several devices which
Status
are
Uninitialized
, and then click
Initialize
.
Step 3
The
Device initialization
interface is displayed.
