Dahua HDBW2831R-ZAS, Руководство по эксплуатации

Страница: 177 / 256

Operation Manual
164
Parameter Error Description
1
Picture modeling error
The picture format is not correct. Import
the picture in JPG format.
2
No face in the picture or the face is not
clear. Change the picture.
3
Multiple faces in the picture. Change the
picture.
4
Fails to decode the picture. Change the
picture.
5
The picture is not suitable to be imported
to the face database. Change the picture.
6
The database error. Restart the camera and
model faces again.
7
Fails to get the picture. Import the picture
again.
8
System error. Restart the camera and model
faces again.
5.10.2.2.2 Batch Importing
Import face pictures in batches. Select this way when you need to add a large number of face
pictures.
Before importing pictures in batches, name face pictures in a format of "Name#SGender#BDate of
Birth#NRegion#TCredentials Type#MID No.jpg" (for example, "John#S1#B1990-01-01#T1#M0000).
For naming rules, see Table 5-14.
●
The max. size of a single face picture is 150K, and the resolution is less than 1080p.
●
When naming pictures, Name is required, and others are optional.
Table 5-14 Description of naming rules for batch import parameters
Parameter Description
Name Enter a name.
Gender Enter a figure. "1" is male and "2" is female.
Date of Birth Enter a figure. Format: yyyy-mm-dd, such as 2017-11-23.
Credentials Type Enter a figure. "1" is ID card and "2" passport.
ID number Enter ID No.
Step 1 Select Setting > Event > Face Recognition > Face Database Config .
Step 2 Click next to the face database that you want to set.
Step 3 Click Batch Registration .