Dahua HD Fisheye Panorama Network Camera Quick Start Guide
7
Figure 2-2
Step 1
Use the inner hex wrench from the accessories bag to unfasten the 3 hex screws on the dome camera
enclosure and then open the dome enclosure.
Step 2
Take the installation position diagram from the accessories bag and then paste it on the installation
ceiling or the wall according to the monitor area. Please dig three bottom holes of the plastic
expansion bolts according to the diagram. Take three expansion bolts from the accessories bag and
then insert them to the holes you just dug and then fix firmly.
Note:
If you need to dig a hole to pull through the cable on top of installation surface, you need to dig a
cable exit hole on the installation surface according to the installation positioning diagram.
If you need to pull through the cable on the side, you need to dig through the U-shape exit hole on
the side of chassis to form a cable access, and then pull the cable through the side exit hole on
the chassis.
Step 3
Adjust the device chassis and pull the cable through the exit hole
. Make “TOP” direction of the device
identical with installation diagram. Make sure the 3 fixture holes on chassis face the three plastic
expansion bolts on the surface. Take 3 self-tapping screws out from the accessories bag and fix them
on the three plastic expansion bolts to secure the dome on installation surface.
Step 4
Take up the dome protection enclosure; aim the cable exit and cover the enclosure. Then use the
inner hex wrench from the accessories bag to fasten the 3 hex screws. So far installation is completed.
Note:
