Dahua HCVR7416L, Руководство пользователя

Страница: 215 / 330

205
4.11.4.2 HDD Manager
Here is for you to view and implement hard disk management. See Figure 4-148.
You can see current HDD type, status, capacity and etc. The operation includes format HDD, and
change HDD property (read and write/read-only/redundancy).
Figure 4-148
4.11.4.3 Record
4.11.4.3.1 Record Control
Caution:
You need to have proper rights to implement the following operations. Please make sure the HDD
has been properly installed.
There are three ways for you to go to manual record menu.

Right click mouse and then select Manual->Record.

In the main menu, from Setting->Storage->Record.

In live viewing mode, click record button in the front panel or record button in the remote control.
System supports main stream and sub stream. There are three statuses: schedule/manual/stop. See
Figure 4-149. Please highlight icon
“○”
to select corresponding channel.

Manual: The highest priority. After manual setup, all selected channels will begin ordinary recording.

Schedule: Channel records as you have set in recording setup (Main Menu->Setting->System-
>>Schedule)

Stop: Current channel stops recording.

All: Check All button after the corresponding status to enable/disable all-channel schedule/manual
record or enable/disable all channels to stop record.