Installation 6
Drill screw holes (and the cable outlet hole if it needs to go through the mounting
Step 1
surface) on the mounting surface
⑤
as indicated on the positioning map.
Different approaches required according to different mounting surfaces.
Step 2
For masonry mounting surface, insert expansion bolts
④
from the accessory pack
in the screw holes.
For wooden mounting surface, expansion bolts are optional.
Adjust the location of the bracket
③
according to cable outlet requirement (top out or
Step 3
side out), and then pull the cable out through mounting surface or the side cable tray.
Align the screw holes on the bracket
③
to those on the mounting surface, then put in
Step 4
and fasten the supplied self-tapping screws
②
to attach the device
①
to the mounting
surface.
Connect the camera to power source and the XVR device, and then aim the lens to the
Step 5
ideal angle, see Figure 3-3 or Figure 3-4.
Figure 3-3
Figure 3-4
For the models with vari-focal lens, you can adjust the zoom and focus through XVR device.
Содержание HAC-HFW2501T-Z-A
Страница 1: ...HDCVI Bullet Camera User s Manual V1 0 1...
