Dahua HAC-HFW2221R-Z-IRE6, Руководство пользователя

Страница: 10 / 17

6
3 Installation
Important

Please install the device in time after it is taken apart, which is to avoid the camera
module being exposed to damp environment for too long.

Before the installation, please make sure the installation surface should be thick
enough to sustain at least 3X weight of the camera.
Step 1
Take out the installation position map from the accessories bag, stick it on the ceiling or wall
according to the cable exit, dig holes on the installation surface according to the installation
position map, and see Figure 3-1. Pull out the camera cable through the cable exit on the
bracket pedestal, and install camera bracket.
Figure 3-1

If it is cement wall, it needs to install expansion bolt first (the installation holes of
expansion bolt need to be in accordance with bracket), then use self-tapping screws to
install bracket.

If it is wooden wall, you can just skip the first step, use self-tapping screws to install
bracket directly.
Step 2 Adjust the camera monitoring direction

If it is the model c or c (1), then use the L-shaped wrench in the accessories bag to loosen
the adjusting screws, adjust the camera to the specific direction which needs to be
monitored, then use L-shaped wrench to tighten adjusting screws and fix the camera, see
Figure 3-2.