6
Figure 3-2
Step 4
Connect the device video output port to the terminal devices such as the DVR, NVS and etc. Then connect
the power cable to the device.
Now you have completed the device installation and cable connection.
You can use the terminal encode devices to view the monitor video.
3.2
IR Dome Camera
The dome camera usually uses the ceiling installation. It can be installed on the ceiling or the wall.
Step1
Please take the installation position map in the accessories bag, and then paste it on the ceiling or the wall
according to your monitor area requirements. Draw and then dig three holes in the installation surface and
then insert three expansion bolts in the holes. Secure these three bolts firmly.
Step 2
Turn counter clockwise to remove the decoration ring. Please dig a “cable exit hole” in the surface
according to the installation position map if you want to draw out the cable from the top of the installation
surface. You need to draw out the cable from the cable channel side port of the pedestal if you want to
draw out the cable from the side port of the cable channel. Adjust the device installation pedestal to the
proper position and then draw the cable through the cable exit. Line up the three screw holes in the device
pedestal to the three plastic expansion bolt holes in the installation position. Put the three self-tapping
screws in the three plastic expansion bolts firmly. Now the dome camera is secure in the installation
surface. See Figure 3-3.
