Dahua G4-HDE Series, Быстрый старт, Страница: 23 / 24

22
4 Web Client Operation
•
Slight difference may be found in the interface due to different model DVRs or different
firmware versions.
4.1 Network Connection
Before attempting to connect to the DVR with the web client, check the following items:
The DVR and PC are connected to the network and can see traffic. The light on the network
interface port should be flashing.
The DVR and PC are configured with the correct IP information. Refer to network setup
(Main Menu -> Setting -> Network).
Use the ping utility from a command window (from the PC, press the Start button then select
Run and enter cmd and press Enter) to confirm network connectivity. The syntax is ping
***.***.***.*** (* = DVR IP address). Usually the return time to live (TTL) value should be less
than 255.
If you want to uninstall the ActiveX web control, please run uninstall webrec.bat.
4.2 Login
Open Internet Explorer and enter the DVR IP address in the address column. For example, if
your DVR IP address is 10.10.3.16, enter http://10.10.3.16 in the address column. The system
will display warning information to confirm that you wish to install the webrec.cab control. Please
click yes button. If you can’t install the ActiveX file, please modify your IE security setup (see
User’s Manual
for more information on this). After installation, the interface is shown as below.
See Figure 4-1. Input your user name and password (the default username is admin and
password is admin) and press the Login button.
Note: For security reasons, please modify your password after you first login.