Dahua F Series DHI-ITC237-PU1B-IR, Руководство пользователя

Страница: 15 / 27

10
Figure 3-4
Step 1. Loosen adjusting screw with screw driver.
Step 2. Adjust in up/down/left/right directions, set device direction according to need.
Step 3. Fasten the screw.
3.2.3 (Optional) Install Network Port Waterproof Cover
Note:
This step is mandatory for outdoor device with standard waterproof cover.
Figure 3-5
Step 1. Place the nipple on the port and press the rubber bead into the main body of the
waterproof connector.
Step 2. Thread the cable without the crystal head through the waterproof connector body, tighten
the rubber ring and waterproof fastening cover. Then, make the crystal head of the cable
and insert the crystal head into the network port.
Step 3. Put the main body of the waterproof connector on the network port and turn the
waterproof connector body clockwise to lock the network port and the waterproof connector
body.
Step 4. Put the waterproof fastening cap over the waterproof connector body and turn the
waterproof tightening cover clockwise to lock the waterproof connector body and the
waterproof fastening cover.