79
Figure 5-40
5.5.8.6.2 Alarm Activation Matrix
Please go to alarm setup interface to set the alarm activate matrix function ((Main
Menu->Setting->Alarm)). See
445H445H
Figure 5-41. You can follow the steps listed below:
z
Select local alarm
z
The record channel function has been enabled and you have selected
corresponding record channel.
z
The video matrix function has been enabled and you have selected
corresponding video matrix channel.
After selecting activation channel in the record channel item, you can enable video
matrix function and then select vide output channel. Once the alarm occurs, system
continues scheduled matrix tour after alarm tour completes. If there is no scheduled
tour available, the matrix will stop at the last activation channel after alarm completes.
When there are several alarm inputs at the same time, the situation maybe a little bit
complex. Here is an example.
System setup is shown as below:
z
Alarm input 1 can activate channel1/2/3/4/5/6
z
Alarm input 2 can activate channel 2/3/4/5/6/7/8
z
Alarm input 1 and alarm input 2 activate video output 1.
So, when there is alarm from channel 1, video output 1 becomes valid. If there is no
alarm from alarm input 2 during the same period, then video output 1 can tour
between channel1/2/3/4/5/6.
When video output 1 goes to channel 3 and there is alarm form channel2, then video
output 1 tour between 4/5/6/7/8/2.
The general principles are:
z
When alarm activate, each valid channel alarm input can activate a complete
tour between activation channels.
Highlighted
here
Select ALL or
cancel
Select channel(s)
here
Input interval here
Содержание DVR0404LB-S
