1
1 Open Package Inspection
1.1 Steps of Inspection
When you receive the device from the forwarding agent, you shall inspect as follows:
Step 1. Please check whether there is any visible damage.
Step 2. The protective materials used for the package of the device can protect most
accidental clashes during transportation. Then you can open the box to check the
accessories. Please check the items in accordance with the list.
Step 3. Finally you can remove the protective film of the device.
1.2 Front Panel
The front panel is shown as below. See Figure 1- 1.
Figure 1- 1
Please refer to the following sheet for front panel button information.
SN
Name
Function
1
Power button
Press it to turn off the device.
2
USB port
/
3
USB port
/
4
HDD4
HDD indicator. HDD4 is blue light by default. If it turns red, there must
be abnormality.
5
HDD3
HDD indicator.
6
HDD2
HDD indicator.
7
HDD1
HDD indicator.
8
Alarm Indicator
When device has alarm, alarm indicator turns on. If alarm indicator
turns red, it means the temperature has gone over 80
℃
, or the fan
does not work.
9
Network
Indicator
When device connects to Internet, network indicator flashes blue. If
network indicator turns red, there must be abnormality in connection.
1.3 Rear Panel
The rear panel is shown as in Figure 1- 2.
