73
ONVIF
Figure 4-26
Select the
On
check box in
Authentication
bar.
Step 2
Click
Save
.
Step 3
4.2.3
Configuring PPPoE
Point-to-Point Protocol over Ethernet, it is one of the protocols that Camera uses to connect to the
internet. Get the PPPoE user name and password from the Internet Service Provider, and then, set
network connection through PPPoE, the Camera will acquire a WAN dynamic IP address.
Disable UPnP while using PPPoE to avoid possible influence.
After making PPPoE connection, the Camera IP address cannot be modified through web
interface.
Select
Setting > Network > PPPoE
.
Step 1
The
PPPoE
interface is displayed. See Figure 4-27.
PPPoE
Figure 4-27
Select the
Enable
check box, and type user name and password.
Step 2
Click
Save
.
Step 3
The successful prompt displays, and then the real-time WAN IP address is displayed. You can
visit Camera through this IP address.
4.2.4
Configuring DDNS
When Camera’s IP address is frequently changed, you can enable DDNS to dynamically update the
relation between domain name and IP address (both of which are in the DNS server). By this, you can
log in the Camera through a domain name.
Preparation
Before making any changes, check if your Camera supports the DNS server.
If Quick DDNS is the DDNS’ type, you do not need to register a new domain name.
If Quick DDNS is not the DDNS’ type, you need to log in the domain name of website
registration provided by DDNS service provider.
