Dahua DHI-NVR5208-4KS2, Руководство пользователя

Страница: 87 / 361

Local Basic Operation 76
Step 2 Check the box to enable reset function.
This function is enabled by default.
Step 3 Click Apply to set settings.
If the password reset function is disabled, you can follow the ways listed below to reset
password.

Device supports Reset button on the main board: You can answer the security
question on the local menu or click the Reset button on the main board to reset
password. Refer to "4.1.3.3 Reset Button " for detailed information.

Device does not support Reset button on the main board: You can only answer the
security question on the local menu to reset password. (Make sure you have set
security questions).
4.1.3.2 Resetting Password on Local Interface
Step 1 Enter the SYSTEM LOGIN interface.

If you have configured unlock pattern, the unlock pattern login interface is displayed.
See Figure 4-6. Click Forgot Pattern , the password login interface is displayed.
See Figure 4-7.

If you did not configure unlock pattern, the System Login interface is displayed.
See Figure 4-7.
To login from other user account, on the unlock pattern login interface, click Switch
User , or on the password login interface, in the Switch User list, select other user to
login.
Figure 4-6