Dahua DHI-LM43-F410, Руководство пользователя

Страница: 9 / 28

2
1.4. Hang the monitor on the wall
In order to install the monitor on the wall, you must prepare a set of standard wall-hanging kit (separately purchased). You are
recommended to use the mounting plate which conforms to the TUV-GS and/or UL1678 standard.
Protective Sheet
VESA Grid
Table
1. Spread the protective film (wrapped on the monitored during packing) on the desk, and place the monitor with its front face down on
the protective film to avoid scratching the screen.
2. Make sure all accessories (hanging rack, lifting rack, desk base, etc.) for installing the monitor have been prepared.
3. Follow the use instructions of the base fitting kit during the operation. In the case of disobedience to the correct assembling steps,
damage to devices or injuries to users or installation persons may be caused. Damage caused by incorrect installation is not included
in the product warranty.
4. Use M6 assembling screws (with a length 10mm greater than the thickness of the assembling rack to fix the wall-hanging kit), and
fasten the screws.
1.4.1. VESA grid plate
DHI-LM43-F410 400(H) x 400(V) mm
Caution:
Prevent the monitor from falling down:
• In the case of wall installation or suspended installation, it is recommended to use the metal assembling rack available on the market
to install the monitor. Refer to the guide attached to the assembling rack for specific installation instructions.
• In order to lower the probability that the monitor falls down and results in personal injuries and property loss under the condition of
earthquake or other natural disasters, please do consult the assembling rack manufacturer to confirm the installation position.
Ventilation requirements for enclosed space
In order to ensure normal heat dissipation, sufficient space from items to
four sides shall be kept, as shown in the figure below.
100 mm 100 mm
100 mm
100 mm