Dahua DHI-KTP01, Быстрый старт

Страница: 10 / 28

Installation and Configuration
2
2
Installation and Configuration

Do not install the device in environment with condensation, high temperature, stained,
dusty, chemically corrosive and direct sunshine.

In case of abnormality after power on, pull out network cable and cut off power supply at
once. Power on again after troubleshooting.

Installation and commission shall be done by professionals. Do not dismantle or repair
arbitrarily in case of device failure. Contact after-sales department.

It is suggested that installation height of device central point shall be 1.4cm–1.6cm above
the ground.
Outdoor Station (VTO) Installation
2.1.1
Surface Mount
Surface mount
Table 2-1
Names of numbers (1)
No. Name
1 Outdoor station (VTO)
2
Waterproof ring
3
ST4×25 self-tapping screw
4 Surface mount box