Dahua DHI-ITSJC-2302-DC12 Скачать руководство пользователя страница 21

User’s Manual 

15

 

Commissioning 

 Radar for Anti-smashing 

5.1

After installing and configuring the Radar, you can check the following items to see whether the 

Radar can properly work. 

 

The Radar can identify people and vehicles. 

 

After  opening  the  barrier  and  making  a  person  enter  the  radar  detection  range,  the 

green indicator does not turn on, and after the person leaves, the barrier arm does not 

fall. This means the radar successfully identified the person. 

 

After opening the barrier and driving a vehicle to the radar detection range, the green 

indicator turns on, and after the vehicle leaves, the barrier arm falls. This means the 

radar successfully identified the vehicle. 

 

The barrier arm does not hit vehicles. 

 

Open the barrier, and drive a vehicle at speed lower than 10 km/h to pass the barrier. 

When it passes the barrier, the green indicator keeps on, and the barrier arm does not 

jitter or hit the vehicle. 

 

Open the barrier, and drive a vehicle to the radar detection range. Stop the vehicle in 

the  detection  range  for  1  minute,  the  green  indicator  keeps  on,  and  the  barrier  arm 

does not jitter or hit the vehicle. 

 

The barrier arm does not hit people. 

 

When the barrier arm is falling after a vehicle leaves, a person passes the barrier, the 

green indicator turns on, and the barrier arm rises and does not hit the person. 

 

A  person  moves  back  and  forth  along  the  direction  of  the  barrier  arm,  the  green 

indicator keeps on, and the barrier arm does not hit the person. 

 Radar for Triggering Snapshot 

5.2

After installing and configuring the Radar, you can check the following items to see whether the 

Radar can properly work. 

 

When a person enters the radar detection range, the green indicator does not turn on, the 

camera does not capture pictures, and the barrier does not open. 

 

When a vehicle enters the radar detection range, the green indicator turns on, the camera 

captures pictures of the vehicle, and the barrier opens. 

 

When  vehicles  pass  the  radar  detection  range  at  speed  lower  than  10  km/h,  the  green 

indicator keeps on, and the camera will not take multiple snapshots for a vehicle detected. 

 

When vehicles pass the radar detection range at different speeds (0 km/h to 30 km/h), the 

capture position error of the camera is smaller than 1 m (3.3 ft). 

Содержание DHI-ITSJC-2302-DC12



























Отзывы: