Dahua DHI-ASGG520T, Руководство пользователя

Страница: 13 / 39

4
Table 3-1 Component description
No. Item Description
1
Passing
electromagnetic
lock
Receives signals from the control board, and locks or unlocks the arms.
2
Access control
panel
Receives signals from the card reader and controls the turnstile.
3 Speaker Broadcast voice prompts.
4
Passage control
panel. Receives and processes signals from the access controller, and controls the
electromagnets and direction indicator.
5
Direction
indicator
Two-way authorization.


Solid red X: Stand by.

Flashes a green arrow in passing direction: Authorization
successful. The turnstile returns to standby mode when the person
passed or it times out.

Flashes a red X 3 times and broadcasts
Authorization failed
:
Authorization failed. The turnstile returns to standby mode.
One-way authorization.


Solid green arrow: Stand by.

Flashes a green arrow: Authorization successful. The turnstile
returns to standby mode when the person passed or it times out.

Flashes a red X 3 times and broadcasts Authorization failed :
Authorization failed. The turnstile returns to standby mode.
Free pass: Solid green arrow means the authorization succeeded.

6
Electromagnetic
chuck lock
When the power is on, the arms can be set in a horizontal position by folding
them to their maximum extent, and then lifting them up again. When the
power is off, the arms will automatically fold themselves.
7 Circuit breaker Protects the turnstile circuit.
8 Power switch Convert the input voltage to 24 V AC power.
9
Card reader
panel
Reads card information and sends the signal to access control.
10 Fan Dissipates the heat caused by the turnstile.
11
Card-swiping
panel
Sends the signal to the card reader when swiping a card.
12
Passage
indicator
Indicates passing status.
13 Turnstile arm Arms of the turnstile.