2. Pull the cable through the connection pole, twine the Teflon tape around the connection pole
and fix it on the connection tray, as it is shown in Figure 3-4
②
.
3. Twist the quick mounting connector into the wall-mounted bracket, use stainless screws to fix,
buckle the safety hook, connect cable and use insulated tape to make it waterproof, which is
shown in Figure 3-4
③
.
Caution
Please make sure the safety hook is installed, otherwise the thermal hybrid dome may fall and
cause accident due to instability! Please refer to the safety hook installation instruction in the
accessories bag for more details.
4. Check if the speed dome is firmly fixed and then device installation is completed, which is
shown in Figure 3-4
③
.
Step 2
Connect the external cable well according to the requirements.
Please refer to step 2 of 3.3.1 Wall-mounted Installation for more details.
Step 3
(Optional) Install waterproof connector for network port.
Please refer to step 3 of 3.3.1 Wall-mounted Installation for more details.
3.3.3 Corner-mounted Installation
Figure 3-5
Step 1
Fix the device on the mounting surface.
1. Dig holes on the mounting wall, insert expansion bolts, use nut to fix and paste glass cement
to make it sealed and waterproof, which is shown in Figure 3-5
①
.
2. Twist the quick mounting connector into the wall-mounted bracket and use stainless screws
to fix it.
