General Configuration 5
Email Address
In order to reset password, input email address properly and update in
time.
Click
Save
to finish initialization.
Step 3
Modifying IP Address
3.2
In order to make the camera get access to network, please plan IP address reasonably
according to the actual network environment.
Log in camera web interface in the IE browser.
Step 1
The factory default IP address is: 192.168.1.108.
The default user is admin; the password is set during device initialization.
Select
Setup > Network > TCP/IP
and the system will display the interface of
“TCP/IP”,
Step 2
which is shown in Figure 3-2.
TCP/IP
Figure 3-2
Configure relevant info of IP address, and click
Save
.
Step 3
Live Video
3.3
Different devices might have different WEB interfaces, the figure in this document is just for
reference, please refer to the document
WEB Operation Manual
in the disk and the actual
interface for more details.
Log in camera web interface in the IE browser.
Step 1
IP address is the one which has been modified.
Default user is admin; the password has been set during device initialization.
Click
Login
and the system will display the WEB main interface, which is shown in
Step 2
