Dahua DH-SD6323E-H, Руководство по установке

Страница: 13 / 28

6
The speed dome has several types of installation brackets. You can refer to the chapter 3 to
chapter 5 for detailed information. Here we are going to install the speed dome in wall mount
bracket.
Step 1 Remove the package and then take out the device.
Step 2 Open the transparent cover and take out the
EPE
around the speed dome driver. Please
remove the protective paster from the driver and take off the camera lens cap. See Figure 1-9.
Figure 1-9
Step 3 Set Dial Switch of Intelligent Speed Dome (Analog Speed Dome)
Set the parameters of intelligent speed dome address, Baud rate and so on. There are SW2 and
SW3 two dial switches on the PTZ, which are used to set the parameters of address, Baud rate
and so on, see Figure 1-10 for more details
, and see “1.3 Dial Switch Setup (For Analog Speed
Dome, HDCVI Speed Dome) for the way to set.
Figure 1-10
Step 4 Install the Transparent Cover