17
Parameter
Description
Ingress Acceptance
Displays whether data can flow into the port. Only
Hybrid
supports the
configuration (By default, all date flows into the port under other models).
See the following situations:
Tagged and Untagged
: All data flows into the port.
Tagged only
: Only tagged data can flows into the port.
Untagged only
: Only untagged data can flow into the port.
Egress Tagging
Displays whether to tag the data that will egress the port. See the following
three situations:
Untag Port VLAN
: If the data flow tag is the same with PVID, the tag
will be peeled.
Tag All
: All data will be tagged.
Untag All
: All data will not be tagged.
Allowed VLANs
Set the allowed VLAN.
Click
Save
.
Step 4
3.1.4
Aggregation
Aggregation is to form the multiple physical ports of the switch into the logical port. The multiple
links in the same group can be regarded as a logical link with the larger bandwidth.
Through aggregation, the ports in the same group can share the communication flow, to make a
larger bandwidth. Besides, the ports in the same group can back up reciprocally and dynamically to
enhance the link reliability.
3.1.4.1
Static Configuration
Select
Advanced > Common > Aggregation
.
Step 1
Aggregation interface
Figure 3-10
Select the aggregation load balancing algorithm mode in
Aggregation Configuration
.
Step 2
There are four types:
Source MAC Address: The aggregation load balancing algorithm based on MAC
address.
