User’s Manual
45
● Select
V2
, and the system can only process information of V2 version.
● Select
V3
, and then
V1
and
V2
become unavailable. You can configure user name,
password and authentication type. It requires corresponding user name, password
and authentication type to visit your device from the server.
Using
V1
and
V2
might cause data leakage, and
V3
is recommended.
In
Trap Address
, enter the IP address of the PC that has MIB Builder and MG-SOFT
MIB Browser installed, and leave other parameters to the default.
Table 3-22
Description of SNMP parameters
Parameter
Description
SNMP Port
The listening port of the software agent in the device.
Read
Community,
Write
Community
The read and write community string that the software
agent supports.
You can enter number, letter, underline and dash to form
the name.
Trap Address
The target address of the Trap information sent by the
software agent in the device.
Trap Port
The target port of the Trap information sent by the
software agent in the device.
Read-only Username
Set the read-only username accessing device, and it is
public
by default.
You can enter number, letter, and underline to form the
name.
Read/Write Username
Set the read/write username access device, and it is
public
by default.
You can enter number, letter, and underline to form the
name.
Authentication Type
You can select from
MD5
and
SHA
. The default type is
MD5
.
Authentication Password
It should be no less than 8 digits.
Encryption Type
The default is CBC-DES.
Encryption Password
It should be no less than 8 digits.
Step 3 Click
Save
.
