manualshive.com logo in svg

Dahua DH-PFM881, Руководство пользователя, Страница: 31 / 48

Поделиться
Скачать
Dahua DH-PFM881 Скачать руководство пользователя страница 31

 

                 DH-PFM881 User Manual            All Right Reserved 

Page 30 

WAN Mode

：

WAN mode can be configured to DHCP/PPPoE/Static IP. When set 

to DHCP, the device can dynamically get the IP address; otherwise, user needs to 
manually set the IP address, Netmask, gateway and other information. 

WAN IP

：

WAN IP address. It should be set to the same segment of IP address of 

the internet provided by ISP, please check with the ISP for this information. 

WAN Netmask

：

WAN Netmask, use can check with the ISP for this information. 

Note: WAN IP address should not be the same as the IP devices of the internet to 
avoid collision. 

Primary DNS and Secondary DNS:

 Please check with the ISP for the information. 

Gateway IP

：

The IP address of WAN gateway. 

7.2

 

Bridge mode 

In Bridge mode, there is no WAN port. The LAN port of the POE adaptor, and the 
LAN2 port of the DH-PFM881 device can all be the LAN port, and the user can 
choose one of them to use as LAN port. Please refer to Figure 3 for the 
connections in Bridge mode, and the IP address/Netmask information setting is 
the same as Router mode. 

7.3

 

Management 

The IP address of the device can be modified, and the management of the device 
can be performed by setting the specified management interface.   

7.4

 

Firewall 

When the firewall is enabled, the device can allow only some devices to be 
associated to. Shown in Figure 23, and there are 4 cases of Firewall filtering.   

Содержание DH-PFM881

















































Отзывы:

Нет отзывов