1
Chapter 1 Introduction
1.1Objective
To instruct the engineering and technical personnel, engineering refer to standard construction,
device installation to meet regulatory requirements, to ensure construction quality.
1.2 Scope
The instructions apply to model for the installation guide
DH-ITC231
HD ANPR camera.
1.3 Range of Reader
Products Division, regional technicians, installation personnel, and customers are not included.
1.4
System Composition
This system is composed of front-end subsystem and rear-end platform software. Front-end subsystem
mainly snapshot plate, analyze plate info, analyze vehicle behavior, store snapshot and etc. Platform
software mainly stores picture, count vehicle flow (statistics), arm and etc.
This installation guide is for front-end subsystem, so only introduce you to installation and debugging of
the subsystem.
1.4.1 Front-end Subsystem Composition
Front-end subsystem is composed of picture snapshot module
（
HD camera and HD lens
）
, vehicle
detection module
（
radar
）
, strobe light module
（
LED fill light
）
, picture backlight module
（
exposure light
）
,
data storage module
（
ITC terminal management device
）
.
DH-ITC231 camera G-CMOS is 2.0 MP, so 1 channel is recommended, see chart below
：
No.
Device
Model
Quanti
ty
Note
1
All-in-one snapshot
unit
ITC231-RU1A-IRL
1
All-in-one device can configure (optional
built-in light-L, heat unit-H, heat and built-in
light-HL); after you select all-in-one device,
you do not need to select separate camera
and housing
4
Cardan joint
bracket
8018
1
5
ITC MINI terminal
management
device
ITSE0804-GN5B-D
1
Optional