Dahua HD Panoramic Multi-sensor Network Dome Camera Quick Start Guide
6
3. Insert the SD card into the card slot shown in Figure 2-2. Press it gently until it locks into
place.
Note
You can check video via connecting the analog video output port to the TV monitor.
Long press the reset button for 4 to 5 seconds to realize the reset the device.
Step 2
Fix the device on the installation surface. To install the device, firstly take out the necessary
accessories, and then do the following:
1. Dig holes on the installation surface (wall), and insert the expansion bolts into the holes you
just dug and lock them firmly. It is recommended to use M8 metal expansion bolts and nuts to
install the junction box.
2. Use 4 hex nuts to fix the junction box on the installation surface, and put the cables into the
junction box. See Figure 2-3.
Figure 2-3 Installation of junction box
3. Install the adapter on the wall-mount bracket and lock the lateral fixing screw firmly. See
Figure 2-4.
Figure 2-4 Adapter installation
4. Use 3 fixing screws to fix the changeover plate on the device, and use one fixing screw to fix
the steel cable on the device. Lock all the screws firmly. See Figure 2-5. The screws used
