Dahua HD Panoramic Multi-sensor Network Dome Camera Quick Start Guide
i
Welcome
Thank you for purchasing our network cameras.
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguards and warnings carefully before you use this series product.
Please keep this user’s manual well for future reference.
Important Safeguards and Warnings
1. Electrical safety
All installation and operation should conform to your local electrical safety codes.
Please check if the power supply is correct before operating the device.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the
Limited power source is rated DC 12V or AC 24V in the IEC60950-1. (Power supply requirement is
subject to the device label).
Please install easy-to-use device for power off before installing wiring, which is for emergent power
off when necessary.
Please prevent the line cord from being trampled or pressed, especially the plug, power socket and
the junction from the device.
Do not connect two power supplying sources to the device at the same time. Otherwise, it might
result in device damage.
We assume no liability or responsibility for all the fires or electrical shock caused by improper
handling or installation.
We are not liable for any problems caused by unauthorized modification or attempted repair.
2. Environment
Do not aim the device at strong light (such as lighting, sunlight, and so on) to focus, otherwise it
might cause overexposure (not the device malfunction), and affect the longevity of CCD or CMOS.
Transport, use and store the device within the range of allowed humidity and temperature.
Do not place the device in a damp or dusty environment, extremely hot or cold temperatures, or the
locations with strong electromagnetic radiation or unstable lighting.
Do not allow water and other liquid falling into the camera in case of damages to the internal
components.
Do not allow rain or damp to the indoor device in case fire or lightning might occur.
Keep sound ventilation in case of heat accumulation.
Pack the device with standard factory packaging or material with same quality when transporting
the device.
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
3. Operation and Daily Maintenance
Do not touch the heat dissipation component of the device directly to avoid scald.
Do not dismantle the device as there is no component that can be fixed by users themselves in the
device. Otherwise, it might cause water leakage or bad image for the device due to unprofessional
