9
2
Structure
2.1
Rear Panel
You can refer to the following figure for
rear panel
information. See Figure 2-1
Figure 2-1 Rear panel
Please refer to the following sheet for detailed information.
SN
Port Name
Function
Connection Note
1
VIDEO OUT
Video output
port
BNC
Output analog video signal. Can connect to TV
monitor to view video.
2
Indication
Light
Red light
System boot up-red light is on
System upgrades-red light flashes.
System resets-red light is on.
3
DC 12V
Power port
Power port.
Input DC 12V.
4
A
RS485 port
RS485_A port, control external PTZ
B
RS485_B port, control external PTZ
G
GND
RS485 ground port.
IR
IR light port
Connect to peripheral IR light control port.
5
LAN
Network port Ethernet
port
Connect to standard Ethernet cable.
Support PoE function.
6
RESET
Reset button
Restore factory default setup.
When system is running normally, press the
RESET button for at least 5 seconds, system
can restore factory default setup.
7
GND port
Please make sure the device is securely
earthed to prevent the thunderstorm strike.
bezpeka-shop.com
