12
9. Adjust the lens position.
a. Loosen the set screws on both sides of the lens bracket, but do not remove the screws.
b. Turn the bracket horizontally and vertically until the desired scene is achieved then tighten the
set screws. Note the following position range:
Horizontal: 0° to 355°
Vertical: 0° to +64°
Image Rotation: 0° to 355°
c. Adjust the lens to the proper focus position.
10. Align the dome enclosure with the pedestal and tighten the three hex screws.
11. Connect the video output ports to the associated output device (monitor, DVR) and connect the
power cable to a 12 VDC power supply.
12. Check the scene on a monitor to ensure the dome enclosure does not obscure the scene.
