Dahua Bullet Wi-Fi Camera Quick Start Guide
11
Figure 4-2
Step 5 Use cross screwdriver to loosen adjusting screw.
Step 6 Adjust the device in all possible directions, and set its monitoring direction
according to the requirements.
Step 7 Use cross screwdriver to tighten the adjusting screws.
Disclaimer
This quick start guide is for reference only. Minor difference might be found in user
interface.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks mentioned are the properties of their
respective owners.
Please visit our website or contact your local service engineer for more information.
If there is any uncertainty or controversy, please refer to our final explanation
5
、
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Attention that changes or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC Compliance Statement
