Dahua D-XVR5104H-4KL-I3 Скачать руководство пользователя страница 29

Страница: 29 / 37

Figure 1-23 SMD

Step 2

Select the channel and enable.

Step 3

Set parameters.

Parameter

Description

Channel

In the Channel list, select a channel to set the motion detection.

Enable

Enable or disable SMD function.

Sensitivity

Set sensitivity, including high, middle, and low. The higher the

sensitivity is, the bigger alarm probability will be, the bigger false

alarm rate will be. The system selects middle by default.

Effective Target

Select alarm object, including person and vehicle.

Schedule

Define a period during which the motion detection is active.

Anti-Dither

Configure the time period from end of event detection to the stop of

alarm.

Alarm-out Port

Click Setting to display setting interface.

●

General Alarm: Enable alarm activation through the alarm devices

connected to the selected output port.

●

External Alarm: Enable alarm activation through the connected

alarm box.

●

Wireless Siren: Enable alarm activation through devices connected

by USB gateway or camera gateway.

Post-Alarm

Set a length of time for the Device to delay turning off alarm after the

external alarm is cancelled. The value ranges from 0 seconds to 300
seconds, and the default value is 10 seconds. If you enter 0, there will

be no delay.

Содержание D-XVR5104H-4KL-I3






































Результаты поиска

Содержание D-XVR5104H-4KL-I3

Отзывы:

Бренды по названию

Популярные бренды

Dahua D-XVR5104H-4KL-I3, Быстрый старт

Результаты поиска

Содержание D-XVR5104H-4KL-I3

Отзывы:

Бренды по названию

Популярные бренды