3
2.2 Dimensions
Figure 2-4 Bracket installation dimensions of 7-inch (X) access controllers (mm [inch])
2.3 Installing the SafetyTemp Temperature Monitoring
Kiosk
1. Detach rear cover of the kiosk.
2. Replace the short cable with a longer one.
3. Flatten the seal ring of the port cover, and then fix the port cover with 4 screws.
4. Thread the long cable through the bracket, and then fix the bracket with 4 anchor screws.
5. Attach the kiosk to the bracket.
6. Connect cables for the kiosk.
7. Put the waterproof plug on the cable, and apply silicone sealant to fill gaps.
8. Install the rear cover and base cover on the bracket.